Flood barrier, easy and hassle-free installation prevent flooding
Mizuyojin
Special Promotion! 50% off price
for 3 customers only!
Mizuyojin Introduction Movie
Don’t you have follow problems?
- Sandbags are heavy and take time to install.
- Need a lot of space to keep sandbags.
- Even put many sandbags, but cannot prevent building flooding.
Easy to install, high water blocking performance and prevent your building from flood
A shutter door in a factory
(8 meters wide)
Factory door
With detachable extension pole
Store entrance
Office entrance door
Residential garage doors
Back door of a residential garage
A simple and easy-to-install flood barrier to prevent building flooding
Mizuyojin
Special Promotion! 50% off price for 3 customers only!
Product Spec
With approximately 100 times the water blocking performance of sandbags, it prevents flooding inside buildings from internal water inundation.
Traditional sandbags, commonly used for flood prevention, weigh about 20 kg per bag and require stacking multiple bags, making preparation very labor-intensive. Additionally, once the sandbags absorb water, they become heavier, and if left unattended, they can cause foul odors, making cleanup difficult.
With UACJ Extrusion’s flood barrier “Mizuyojin,” one adult can quickly set it up, providing approximately 100 times the water-blocking performance of sandbags. After use, simply rinse it with water for easy cleanup.
Our in-house test with water at 1.2 meters high and 3 meters wide
Outsourcing test with water at 0.5 meters high and 2 meters wide
Product Specification Details
Main Material
Flood barrier, end posts, intermediate posts (aluminum)
Waterproof rubber (EPDM foam rubber)
Size (1 pcs)
Thickness: 33mm
Height: 150–550mm (adjustable in 100mm increments)
Width: 500–3,000mm (adjustable in 1mm increments)
Range can block water
Height: 0.15m–1.1m
Width: 0.5m–approximately 15m
By connecting flood barriers with intermediate posts, openings wider than 3m can also be blocked.
Water blocking performance
Equivalent to JIS A 4716 Ws-3 class [leakage amount: 20ℓ/(h·m²) or less]
Based on our in-house test results with a water depth of 500mm and a flood barrier width of 2,000mm
This product cannot completely prevent water leakage. The amount of leakage may vary depending on the structure of the building and the condition of the installation site.
Maintenance
Store indoors, avoiding direct sunlight and rain.
To prevent the deformation of the waterproof rubber and a decrease in its water-blocking performance, hang the barrier on hooks on a wall or store it upright without compressing the rubber.
After use, rinse the barrier with tap water, including the hollow parts, and allow it to dry thoroughly before storing.
Inspect the barrier at least once a year and replace the waterproof rubber if it has deteriorated.
Waterproof rubber (EPDM foam rubber, 30mm wide, 10mm thick)
Video of comparative test of installation and properties of Mizuyojin flood barrier
Service Flow
01.
Inquiry and Request for Quotation (Free)
Please provide photos of the intended installation location and the dimensions of the entrance. Our representative will get back to you with information on whether installation is possible and a rough estimate.
02.
On-Site Inspection
To determine the specifications of the stop plate, an on-site inspection will be conducted as necessary.
Note: On-site inspections are available nationwide, except in certain regions.
03.
Product Proposal
We will propose the optimal specifications tailored to the installation location. Depending on the site, construction work may be required. Please consult with a local contractor or similar professional for installation. We are also happy to assist with referrals to contractors, so feel free to contact us for further assistance.
04.
Stop Plate Implementation
We will begin manufacturing the stop plate upon receiving your formal order.
(Estimated delivery time: Typically around 30 to 45 days)
If installation work is required, please coordinate with your contractor to schedule the construction.
A simple and easy-to-install flood barrier to prevent building flooding
Mizuyojin
Special Promotion! 50% off price for 3 customers only!
Customers Voice
Corporate Customer
- List Item #1
- List Item #1
- List Item #1
- List Item #1
- List Item #1
We had previously given up on addressing the issue because installing stop plates at several dozen entrances would be extremely costly. However, with water prevention measures, we were able to install them all at once within our budget.
Company A
- List Item #1
- List Item #1
- List Item #1
- List Item #1
- List Item #1
There were various types of entrances requiring stop plates, but they accommodated all of them by creating custom parts as needed. Additionally, thanks to innovative product design, we were able to keep the construction costs to a minimum.
Company B
- List Item #1
- List Item #1
- List Item #1
- List Item #1
- List Item #1
The installation target was large, frequently used shutters. However, the installation work was completed in about 1 to 2 hours per location, which was very helpful as it meant there was no need to interrupt our operations.
Company C
Private Customer
- List Item #1
- List Item #1
- List Item #1
- List Item #1
- List Item #1
Previously, we considered installing stop plates and obtained a quotation, but the cost was prohibitively high, so we abandoned the idea. However, Water Prevention Measures were available at an affordable price, allowing us to proceed with the installation. As a result, we have reduced the risk of water damage and can now spend our time with peace of mind.
Person A
- List Item #1
- List Item #1
- List Item #1
- List Item #1
- List Item #1
In recent years, the frequency of heavy rainfall has increased, leading to more frequent flooding incidents. We used to install sandbags each time, which was physically demanding. Additionally, sandbags had poor water resistance and required cumbersome cleanup and smelled unpleasant after use. Installing stop plates has greatly simplified the process and made things much easier.
Person B
Production and Sales Company
manufacturer
UACJ Extrusion Corporation
Tokyo Sankei Bldg., 1-7-2 Otemachi Chiyoda-ku, Tokyo
Mizuyojin introduction for Japanese
www.ecms.co.th/en/mizuyojin-flood-barrier-en/
Sales Representative
IRIE ASIA CO.,LTD.
47/3 Soi Nuan noi, Ekamai Rd., Klongton Nua,
Wattana, Bangkok 10110.